CS ONE
15000503-0
The simplest charger on the market, with polarity free clamps, CTEK APTO technology and packed full of high end features.
CTEK's CS ONE aims to make battery charging as simple as possible. You'll notice that both clamps are black and not the usual black and red. This is due to both clamps being polarity free, allowing you to connect either of the clamps to the postive or negative pole of the battery. Also fitted with CTEK's APTO technology, CS ONE is able to instantly analyse and detect what battery has been connected and deliver a customised charge routine, without you needing to push a button. The LED's on the top of the charger will then indicate how long is needed to fully charge the battery. CS ONE is compatible with all Lead-Acid batteries and Lithium.
Connect CS ONE to the CTEK app and you will be able access CS ONE's other features such as...
- RECOND. For restoring and reconditioning Lead-Acid batteries
- WAKE UP. For reviving seemingly dead Lithium and Lead-Acid batteries
- SUPPLY. For using CS ONE as a power supply
You can also use the app to check charge and the voltage being supplied.
Description
Features
Specifications
CS ONE
CTEK's CS ONE aims to make battery charging as simple as possible. You'll notice that both clamps are black and not the usual black and red. This is due to both clamps being polarity free, allowing you to connect either of the clamps to the postive or negative pole of the battery. Also fitted with CTEK's APTO technology, CS ONE is able to instantly analyse and detect what battery has been connected and deliver a customised charge routine, without you needing to push a button. The LED's on the top of the charger will then indicate how long is needed to fully charge the battery. CS ONE is compatible with all Lead-Acid batteries and Lithium.
Connect CS ONE to the CTEK app and you will be able access CS ONE's other features such as...
- RECOND. For restoring and reconditioning Lead-Acid batteries
- WAKE UP. For reviving seemingly dead Lithium and Lead-Acid batteries
- SUPPLY. For using CS ONE as a power supply
You can also use the app to check charge and the voltage being supplied.
Features
- Polarity free clamps. No need to worry what clamp goes where
- APTO technology. The battery will automatically be detected and a custom charging programme will be set
- LED's for charge status
- No modes to set, it is done automatically
- CTEK App
- RECOND Mode
- WAKE UP Mode
- SUPPLY Mode
- Voltage and aperage monitoring
- Built in temperature compensation
Specifications
- For 12V batteries
- Compatible with Lead-Acid and Lithium batteries
- Compatible technologies
- WET
- Ca/Ca
- AGM
- EFB
- GEL
- LifePO4
- Less than 4% Ripple
- Bluetooth connectivity
- IP65 Protection
- Mains Cable Length: 1.4m
- Charge Cables Length: 2m
.svg){kind=small}
